Accessories

R1575 (1 lb. Tub)
Sold individually.

DESCRIPTION:
Used for cleaning, polishing and all modifications on gas permeable
or PMMA lenses. Also called X-Pal, this white powder is mixed with
water to make polish. Standard mixture is 12 parts water to one part
721 powder.

R1400 (4 oz.) – Not Pictured
R1416 (16 oz.)
Sold individually.

DESCRIPTION:
A cleaning solution for lenses that either exhibit poor initial wettability or have acquired a heavy film over time. The solution is intended to be used in the practitioners office only and not dispensed to patients. Damage may result if used too frequently or if a lens is allowed to soak in it for an extended period of time.

R1500 (60 ml.)
Sold individually.

DESCRIPTION:
Polishing compound for gas permeable contact lenses. Used for cleaning, polishing and all modifications on gas permeable or PMMA lenses. Pre-suspend; ready to use from the bottle.

R1550 (4 oz.)
R1552 (32 oz.) – Not Pictured
Sold individually.

DESCRIPTION:
Polishing compound for gas permeable contact lenses. Used for cleaning, polishing and all modifications on gas permeable or PMMA lenses. Pre-suspend; ready to use from the bottle.

R2301
Sold individually.

DESCRIPTION:
Used to clean and polish the inside (base curve side) of gas permeable and PMMA lenses.

R2305WH
Sold individually.

DESCRIPTION:
Replacement edge polish sponge with hole for use with 1” drum tool.

R2305WOH
Sold individually.

DESCRIPTION:
Replacement polishing sponge for use with 1” drum tool

R2305
Sold individually

INCLUDES:
-1” Drum tool and edge polish sponge with hole

R2260
Sold individually.

DESCRIPTION:
Two-piece suction cup used to hold onto contact lenses during modification. Has a convex and concave interchangeable piece to hold onto either side of the lens.

R2290 (2 ¾”)
Sold individually.

DESCRIPTION:
Flat 2 ¾” sponge used for 3” outer velveteen covered drum tool and automatic edgers.

R2291 (3”)
Sold individually.

DESCRIPTION:
Flat 3” sponge used for 3” inner velveteen covered drum tool and automatic edgers.

R2700 (3” – Complete)
Sold individually.

DESCRIPTION:
3” velveteen covered tool with a flat 3” diameter sponge under the velveteen. Used for adding power, cleaning and polishing gas permeable and PMMA lenses.
INCLUDES:
-3” Drum tool base, 3” edger sponge and 5” velveteen pad

R3200
Sold individually.

DESCRIPTION:
A simple and effective tool for enhancing the fluorescein patterns of all GP lenses.
INCLUDES:
-#12 Kodak Wratten filter, one strip of hook-and-loop tape and convenient storage package with instructions

R3300 (Box of 300)
Sold individually.

DESCRIPTION:
Fluorescein dye used to observe the fit and movement of gas permeable and PMMA lenses.

R1320 (12 oz. Pump bottle)
Sold individually.

DESCRIPTION:
Liquid optical hand soap that effectively removes all grease and oils from hands prior to handling contact lenses.

R3005
Sold individually.

DESCRIPTION:
Clear flat pack mailer for storage and shipping of PMMA or gas
permeable lenses. Can be snapped in half for single lens
dispensing. This is the same case used by Art Optical for initial
lens shipment.

R3000
Sold individually.

DESCRIPTION:
White lens case is suitable for lens soaking or storage, but not suitable for heat disinfection.

R1745
Sold individually.

DESCRIPTION:
Contact lens storage case from Menicon

R3305
Sold individually.

R3120
Sold individually.

DESCRIPTION:
This device removes soft lenses by gently pinching the lens off the eye. Not intended for gas permeable lens removal.

R3100
Sold individually.

DESCRIPTION:
Small suction cup used for removing gas permeable and PMMA lenses from the eye. Instructions included.

R3110
Sold individually.

DESCRIPTION:
Small bulb style suction cup with hole used for removing gas permeable and PMMA lenses from the eye. Instructions included.

R3105
Sold individually.

DESCRIPTION:
Small suction cup with hollow handle used for removing gas permeable and PMMA lenses from the eye. Instructions included.

R3130
Sold individually.

DESCRIPTION:
Large diameter GP lens remover.